NoMix Valve Cartridge Solves Your Mixing Problems

For MIXET® and Moen® brand tub/shower valves

Common Problems

The most common installation problems are listed here with steps to avoid these issues:

  1. Failure to deburr the valve properly will tear the rubber boot, causing water to leak. If this happens remove the NoMix cartridge and properly deburr the Mixet valve. Replace the damaged boot on the NoMix cartridge and re-install.
  2. The Mixet valve retainer has a plastic washer that must be in place or water will leak. Take care not to lose this washer when removing the old cartridge. If water is leaking carefully inspect the retainer nut and if the plastic washer is missing you will need to replace it to solve the problem.
  3. If the Mixet valve has been retro-fitted with an after market replacement seat, this seat must be removed before installing the NoMix replacement cartridge.
  4. Not posting the operating instructions after the repair is complete. Typically the tenant will twist the cartridge causing damage to the unit.
Solution Graphics